Snyder Manufacturing, Inc
Reasons to use a Jiffy-tite disconnect tool
· Tool enables much quicker disconnect of tube from fitting
· No damage to the fitting or the spring clip during disconnect process (no need to replace the spring clip or the fitting)
· System integrity remains intact
· Spring clips stay in place at all times, no lost or misplaced spring clips as well as no down time to get a replacement spring clip
· Because spring clip stays on fitting at all times, reinstallation of tube into fitting accomplished by simply pushing the tube back into the fitting
Snyder Manufacturing is the master distributor of Jiffy-tite transmission cooler disconnect tools. Jiffy-tite has been the leader in quick disconnect fittings for many years. About 5 years ago we parterned with Jiffy-tite to meet the rising need to get these tools onto the market.
Snyder Manufacturing manufacutures and distributes this proffesional line of disconnect tools. If you are interested in distributing/purchasing these tools please dont hesitate to contact us.
For more information please read on.
| The 3/8" Jiffy-tite® Quick Connect fitting is currently the most widely used quick connect fitting used in the marketplace. The 3/8" fittings are found on all 1996 and newer General Motors transmissions. The radiator end of the transmission oil cooling line houses many Jiffy-tite® 3/8" Quick Connect fittings as well. These are also used on many DCX applications. |  |
| The 1/2" Jiffy-tite® Quick Connect fitting is used on radiator engine oil cooler lines on light duty General Motors trucks, vans and SUVs. Also used on radiator engine oil cooler lines on Oldsmobile Aurora and Cadillac STS, Deville and ElDorado. |  |
| The 5/8" Jiffy-tite® Quick Connect fitting is used on transmission oil cooler lines on all General Motor vehicles utilizing an Allison transmission. The 5/8" Jiffy-tite® Quick Connect fitting is also used in radiator engine oil cooler applications for all General Motors trucks and SUVs equipped with an external engine oil cooler. |  |
| The 5/8" Jiffy-tite® Quick Connect fitting is used on transmission oil cooler lines on all General Motor vehicles utilizing an Allison transmission. The 5/8" Jiffy-tite® Quick Connect fitting is also used in radiator engine oil cooler applications for all General Motors trucks and SUVs equipped with an external engine oil cooler. |  |
